We tested our fleet of demo 7.62mm cans and one 9mm can on a Noveske 300 Blackout 8" AR - ammo used was Remington 300 blackout 220 Gr. subsonic.
Suppressors tested in this session:
-Gemtech HVT (thread-on)
-YHM Phantom 7.62 SS/QD
-YHM Phantom 7.62 Ti/QD
-SWR Trident-9, 9mm suppressor
If you're new to the Forum, please read these two posts on our sound testing first:
HOW TO READ OUR SOUND TESTING RESULTS
SOUND TESTING EQUIPMENT, PROCEDURES & METHODOLOGY
ABOUT THIS TESTING SESSION:
All of the suppressors cycled our Noveske perfectly, with the exception of the Gemtech HVT. For some reason the Noveske and the HVT didn't get along - we had feeding issues three times during the 10 round test.
We included one 9mm suppressor in this test. Most manufacturers rate their 9mm cans for 300 Blackout / 300 Whisper subsonic ammo. We'll do a full "9mm suppressors on 300 Blackout host" test in the future - we included this one 9mm can in the test for comparison purposes only.
Gemtech HVT (thread-on):
YHM Phantom 7.62mm SS/QD:
YHM Phantom 7.62mm Ti/QD: